EN
100
10 12 15
- Turn stitch length dial to the desired length.
- Pattern selector on " " or " ".
- Center needle position.
- Position the fabric to be darned under the
presser foot together with the under laying
fabric to be used.
-
L
ower the presser foot and alternately
sew forward or reverse using the reverse
sewing lever.
- Re
peat this motion until the area to be
darned is lled with rows of stitching.
For reverse sewing instructions, see gure A,
page 42.
Please note:
No "S" marking is shown on the stitch length
dial by model 10.
Darning
To Next Page
Loading...
