EN
102
10 12 15
- Turn stitch length dial to the desired length.
- Pattern selector on " " or " ".
- Center needle position.
- Fold in the edge of the fabric
(approximately 6 mm 1/4").
- Place the lace under the folded edge of
the fabric allowing it to underlap the fabric
slightly as required by the pattern of the
lace.
- Sew on the edge of the fabric fold.
- You can add a decorative touch by using
the satin stitch to sew on the lace.
Please note:
No "S" marking is shown on the stitch length
dial by model 10.
Attaching lac
To Next Page
Loading...
