EN
60
10 12
Function of stitch length dial Straight
Stitching
Turn the pattern selector dial to " " or " ".
The stitch length is controlled with the stitch
length dial. While "2" - "3" on the dial gives a
suitable stitch length for ordinary purposes.
Generally speaking the ner the fabric the
ner the thread and shorter the stitch length,
the heavier the fabric the thicker the thread
and longer the stitch length.
At stitch length "0" the fabric will not move
and the needle will keep piercing at the
same point.
Please note:
No "S" marking is shown on the stitch length
dial by model 10.
Straight stitching and needle
position
To Next Page
Loading...
