EN
86
12 15
Triple straight stitch: (1)
Pattern selector on " " or " ".
For hardwearing seams.
Turn the stitch length dial to "S".
Turn the stitch width dial to "0".
The machine sews two stitches forwards
and one stitch backwards.
This gives triple reinforcement.
Triple zigzag: (2)
Pattern selector on " ".
For hardwearing seams, hems and
decorative seams.
Turn the stitch length dial to "S" and adjust
the stitch width dial between "3"and "5".
(model 15)
Triple zigzag is suitable for rm fabrics like
denim, corduroy, etc.
Stitch selection
To Next Page
Loading...
