6
1
2
3
4
5
6
en
Selecting embroidery motif
› Choose your embroidery motif, a border or a combination of patterns.
Fixing the stabilzer on the fabric
› Select the stabilizer suitable for fabric and embroidery motif.
› Stabilize light, soft and loosely woven fabrics additionally with spray starch (1).
› To achieve an optimal stability, spray soluble adhesive on the stabilizer.
› Place the fabric on the stabilizer.
Marking the position of the embroidery motif
› Mark the center of the embroidery motif with chalk or a marking pencil on the fabric (2).
› While positioning, be aware that the fabric needs to overlap the embroidery hoop at 5 cm
on every side.
Preparing the embroidery hoop
› Loosen the setscrews on both hoop sides so that the inner hoop can be removed without
using force (3).
› Attach the embroidery template holders to the embroidery template.
› Place the embroidery template into the inner hoop (4).
Hooping the fabric
› Place the inner hoop with the embroidery template onto the fabric (5).
› Make sure that the center of the motif and the center of the template lie exactly on top of
each other.
› Put the fabric and the inner hoop into the outer hoop.
› Please be careful that the fabric does not get deformed.
› Make sure that the arrow markings match exactly at the lower end and in the middle of the
hoop.
› Tighten both setscrews evenly without using any tools.
› Remove the embroidery template.
› Stretch the fabric and the stabilizer evenly in the hoop.
› Push the fabric clamps into the provided notches (6).
To Next Page
Loading...