INSTALLING THE DISHWASHER
Step 4 Check The Electrical Requirements And Cautions
In the United States, install in accordance with the National Electric Code/State and Municipal
codes and/or local codes.
In Canada, install in accordance with the Canadian Electric Code C22.1-latest edition/Provincial
and Municipal codes and/or local codes.
Use flexible, armored or non-metallic sheathed, copper wire with a grounding wire that meets the
wiring requirements for your local codes and ordinances.
Use the strain relief method provided with the wiring junction box or install a U.L.-listed/CSA-
certified clamp connector to the wiring junction box. If using conduit, use a U.L.-listed/CSA-
certified conduit connector.
The electrical requirements for the dishwasher are as follows:
12
For cable direct connections.Hard wire installation.
To Next Page
Loading...
