USE
WASH CYCLES FLOW CHART
RINSE &
HOLD
CRYSTAL &
CHINA
REGULAR
NORMAL
PLUS
QUICK
POTS &
PANS
SOAK &
WASH
AUTO
Prewash Prewash
Prewash
95℉ (35℃)
Prewash
×
Prewash
113℉ (45℃)
Prewash
113℉ (45℃)
Prewash
104℉ (40℃)
×
Main Wash
113℉ (45℃)
Main Wash
131℉ (55℃)
Main Wash
140℉ (60℃)
Main Wash
122℉ (50℃)
Main Wash
149℉ (65℃)
Main Wash
149℉ (65℃)
Main Wash
149℉ (65℃)
×
×
Rinse Rinse Rinse Rinse Rinse Rinse
× × × × × ×
Intermediate
Rinse 140
℉
(60℃)
Intermediate
Rinse
×
Dry Hot
Rinse 140℉
(60℃)
Dry Hot
Rinse 149℉
(65℃)
Dry Hot
Rinse 149℉
(65℃)
Dry Hot
Rinse 149℉
(65℃)
Dry Hot
Rinse (68℃)
Dry Hot
Rinse 155℉
(68℃)
Dry Hot
Rinse 155℉
(68℃)
×
Drying Drying Drying
×
Drying Drying Drying
WASH OPTIONS
OPTION DESCRIPTION ACTIVATION
Half Load Directs wash functions to either the upper
rack, lower rack, or both. Shortens the
selected cycle wash time and reduces
energy and water consumption.
Press the Half Load button 1 time to activate the Upper
Half Load, 2 times to activate the Lower Half Load or 3
times to activate the Half Load option on both upper and
lower racks. The corresponding indicator will also
appear on the display. Press the "Start/Pause" button
and close the door within 4 seconds to activate the
option.
Sanitize
1
Ensures maximum hygiene with increased
rinse water temperature to eliminate
bacteria up to 99.9%.
Press the Sanitize button until the LED light comes on.
The corresponding indicator will also appear on the
display. Press the "Start/Pause" button and close the
door within 4 seconds to activate the option. At the end
of a successful sanitization, the corresponding indicator
will light up. If the washing cycle is interrupted or
adequate water heating cannot be achieved, the
sanitizing LED may not light.
Scrub
Increases wash time and water
temperature to reach optimal washing
conditions and perfectly dissolve the
detergent.
Press the Scrub button until the LED light comes on.
The corresponding indicator will also appear on the
display. Press the "Start/Pause" button and close the
door within 4 seconds to activate the option.
Extra Dry Adds extra heating and drying steps to the
selected wash cycle to get perfectly dry
dishes. Increases the rinse water
temperature and extends the dry time.
Press the Extra Dry button until the LED light comes on.
The corresponding indicator will also appear on the
display. Press the "Start/Pause" button and close the
door within 4 seconds to activate the option.
Delay
Delays the start of the selected wash cycle
by 1-24 hours at 1-hour increments.
Press the "+" button to delay the cycle start time by 1
hour. The display will show cycle duration and
programmed delay time alternately for 2 seconds.
Continue to press "+" until you reach the desired delay
time. Press the "-" button to decrease the delay time.
The corresponding indicator will also appear on the
display. Press the "Start/Pause" button and close the
door within 4 seconds to activate the option.
35
To Next Page
Loading...
