10
INSTALLINGTHEBACKGUARD
The back guard must be installed prior to
operation of the appli ance for appropriate
ventilationoftheovencompartment.
Thesuppliedbackguardisa2‐partassembly.The
box also contains a set of metal screws for
securingthebackguardtotheworktop.
Disassemble the back guard and position the
frontparton theworktop. Align the screw holes
with the corresponding holes at the back of the
worktop.
If the holes are not aligned, partially loosen the
brackets at the back of the worktop as shown
below.
Installthefrontpartofthebackguardby
tighteningthe2centralscrewsfromthetopand
2lateralscrewsfromthebottom.
To Next Page
Loading...
