37
Installation instructions
4-Wire branch circuit (for US and
CANADA)
Refer to the following Figure:
Disconnect ground from neutral at free end
of conduit.
Connect the green GROUND wire from the
oven to the GROUND wire in the junction
box (bare or green colored wire).
Connect the red and black leads from the
oven to the corresponding leads in the
junction box.
After installation
The oven only functions when the door is closed
correctly.
After the first use, clean the inside of the oven and
the accessories, following the cleaning
instructions given in the section “Oven cleaning
and maintenance”.
Fit the Turntable support in the center of the oven
cavity and put the Turntable ring and the
Turntable plate on top, making sure they slot in.
Whenever you use the microwave, the turntable
plate and the respective accessories must be
inside and correctly fitted. The turntable plate can
rotate in both directions.
To Next Page
Loading...
