Need help?Do you have a question about the Berthold GAMMAcast LB 6739 and is the answer not in the manual?
General| Measured Variable | Gamma radiation |
|---|---|
| Power Supply | 24 V DC |
| Output | 4-20 mA |
| Protection Class | IP66 |
| Operating Temperature | -20 °C to +60 °C (depending on version) |
Provides introductory remarks about the GAMMAcast detectors and the manual.
Specifies the required location for storing the operating manual and related documentation.
Identifies the qualified personnel authorized for installation, operation, and maintenance.
Defines the period for which the operating manual is applicable and valid.
States the copyright protection of the manual's content and restrictions on reproduction.
Explains the chapter organization to facilitate user familiarization with the detectors.
Defines the identifiers, meanings, and examples used for software interface and operations.
Details warning note design, symbols, signal words, source, consequence, prevention, and emergency actions.
Illustrates symbols found on the device and their meanings, including manual references.
Declares compliance with EU directives and conditions that may void the statement.
Highlights critical instructions for safe operation and storage of the manual.
Defines proper usage by adhering to instructions, safety guidelines, and maintenance.
Lists circumstances considered improper use and their consequences, including warranty void.
Outlines the minimum requirements for personnel working with the product, divided into groups.
Specifies the operator's responsibilities regarding personnel training and product operation.
Provides a general overview of the GAMMAcast detectors and their main components.
Describes the scintillator types used in different GAMMAcast detector models.
Details the features of the connection cable, including protection against moisture and temperature.
Explains the water cooling system's purpose and its integration in specific detector models.
Provides guidelines for proper storage conditions to maintain device integrity.
Guides through the initial steps for operating the GAMMAcast detector safely and correctly.
Describes the terminal box used for connecting detectors and the EVU, including connection types.
Provides instructions and considerations for installing the terminal box in its operating environment.
Illustrates the wiring of the terminal box, showing cable connections to the EVU or terminal box.
Details the procedure for connecting the water cooling system to the GAMMAcast detectors.
Specifies the minimum cooling water requirements for the GAMMAcast detectors under various conditions.
Explains system requirements and connections for operating the detector using a service modem.
Guides on establishing a connection using the LB 67xx PC Control software via USB.
Details the process of updating the detector's software using the Flash Loader program.
Describes connecting and setting up the detector with the EVU LB 452 for operation.
Describes the automatic detection and setup of the GAMMAcast detector when connected to an EVU channel.
Explains how to acquire and interpret plateau curves for detector characterization.
Details the configurable settings for plateau acquisition, including start/end voltage and step size.
Guides the user through the procedure of acquiring a plateau curve for the detector.
Covers displaying, finding operating points, and exporting plateau acquisition data.
Describes how to find and set a new operating point for the photomultiplier.
Explains how to export plateau acquisition data in .txt file format.
Allows viewing and modifying detector parameters like high voltage control mode and detector code.
Provides guidance on selecting the appropriate control mode for different GAMMAcast detector models.
Lists possible detector codes corresponding to specific detector types and their configurations.
Explains how to set the high voltage, recommending the 'Acquire Plateau' function.
Covers monitoring detector temperature, setting alarms, and understanding hysteresis.
Displays a tabular overview of excessive temperatures, independent of set alarm thresholds.
Allows viewing current error messages, codes, and the error history of the detector.
Provides access to a detailed error list within the detector error summary.
Offers options for exporting service data, resetting settings, and rebooting the detector.
Details the process of exporting service data to a USB flash drive.
Explains how to reset the detector to its factory settings, noting data loss.
Describes the procedure for rebooting the GAMMAcast detector for safety reasons or after updates.
Lists and describes error codes for GAMMAcast detectors, including correction methods.
Lists error codes related to the mainboard and its components.
Details error codes associated with detector control functions and parameters.
Lists error codes related to system and process connections for the detector.
Guides visual inspection of detector components for signs of damage like cracks or discoloration.
Details the procedure and tools required for replacing the PMT or crystal unit in LB 6739.
Provides instructions and tools for replacing the SiPM-crystal combination in LB6760 detectors.
Outlines the safe and compliant disposal procedures for GAMMAcast detectors, considering toxic components.
To Next Page
