Bertini BR1505B4 - Step 3: Attach Mattress Support

STEP 3
BECKEM 4 IN 1 CRIB
BR1505B4
Attach mattress support (F) to the side panels (B & C) with mattress support
bolts (3) and spring washers (6).
Use Allen key (9) to tighten the bolts.
3
NOTE: The above photos and drawings showing how to properly attach the
mattress support are for reference only. Crib styles and colors will vary.
`
6
B
C
A
F
CORRECT
* Tabs on corners of
mattress support should
point up.
CORRECT
"THIS SIDE UP" label
shows which side to
face upward.
6
3
9