Bertini DL1302B4NR - Page 10

STEP 4
4 IN 1 CRIB
DL1302B4NR
Attach mattress support (H) to the posts with mattress support bolts (3) and spring washers (7).
Use Allen key (5) to tighten the bolts (3).
A
F
E
D
B
H
3
7
NOTE: The above photos and drawings showing how to properly attach the
CORRECT
"THIS SIDE UP" label
shows which side to
face upward.
CORRECT
* Tabs on corners of
mattress support should