BESAFE Beyond - Adjusting the seat to the growing child; Shoulder belt;headrest height; Leg space

BeSafe Beyond | 12
105-125 cm
1
3
2
1 2
3 positions
3
1. The height of the shoulder belts and the headrest can be adjusted by
pulling the headrest handle upwards at the back of the headrest and
moving the headrest up or down. To be able to do so, the harness buckle
has to be opened and the straps have to be pulled out. (1)
2. To find the right height for your child, move the headrest all the way up,
place your child into the seat, and then move the headrest downwards
until it sits directly on your child’s shoulders. (2)
3. Important for use on the front seat: you should always have a minimum
distance of 5 cm between the car’s front shield and the top of the child’s
head or headrest, whichever is higher. If your car does not enable this
for the highest headrest positions, you need to move the seat to the back
seat instead.
• You can decide with how much leg space you want to install the seat by
adjusting the base’s front brace position. This needs to be done before
installing the base. See user manual of the base. (3)
Shoulder belt/headrest height
Leg space
Adjusting the seat to the growing child