Need help?Do you have a question about the BESAFE iZi Modular i-Size base and is the answer not in the manual?
Child seat MUST NOT be installed in a front passenger seat with an activated airbag.
iZi Modular i-Size base requires a car equipped with ISOfix anchorage points for installation.
The floor support must always be used and fully pushed down until it touches the floor.
Do not attempt to dismantle, modify or add any parts; warranty void if non-original parts are used.
Do not use aggressive cleaning products. Do not use the seat for longer than 7 years.
Familiarize yourself with key components like the front brace, floor support, and ISOfix connectors.
Install the front brace for iZi Modular; adjust leg room by pulling out the front brace box.
Connect ISOfix connectors to vehicle points, ensuring ISOfix indicators show green for correct installation.
Push the base firmly against the vehicle seat backrest until it is secure.
Adjust the floor support to ensure it contacts the vehicle floor; green indicator confirms correct contact.
Slide the central grey ISOfix release switch towards the front to release both connectors.
The child seat must not be installed in a front passenger seat with an activated airbag.
Always use the floor support fully pushed down; front brace must be fitted for iZi Modular.
Ensure all indicators are green before you drive the vehicle.
24 months warranty for material/manufacturing faults. Valid for appropriate use; contact retailer for service.
Warranty void without receipt, or due to incorrect use, abuse, misuse, or negligence.
General| Installation | ISOFIX |
|---|---|
| Approval | UN R129 (i-Size) |
| Adjustable leg support | Yes |
| Indicators | Visual and audible indicators for correct installation |
| Color Options | Black |
| Compatibility | iZi Modular i-Size car seat |
| Safety Standards | i-Size |
To Next Page