BeSafe Beyond | 9
Placing the child into the seat
1. While pressing the button of the central adjuster, pull the shoulder belts
away from the seat with a flat hand. Make sure to pull the belts evenly
so that they stay at the same length. Do not pull on the shoulder pads, as
they are fixed and cannot move. (1)
2. Open the harness buckle. (2)
3. To keep the shoulder straps out of the way, place the shoulder pads onto
the magnets on each side of the seat shell. (3)
4. To keep the crotch strap out of the way, fold the crotch strap forwards till
it meets the magnet to hold it in place.
5. Place your child into the seat and adjust the position of the shoulder
belts and headrest if needed - see section “Adjusting to the growing
child”.
6. Place the shoulder belts over the child’s shoulders and close the buckle:
CLICK! (4)
Click!
1
4
2
3
To Next Page
Loading...
