What to do if the fault light is on red on my BESEN Battery Charger?
If the fault light on your BESEN Battery Charger is red, it indicates that the EV charging station is experiencing a fault. You should report it for repair.
How to fix a BESEN BS-B10 when the power light is off?
If the power light on your BESEN Battery Charger is off, it could be due to a couple of reasons. First, ensure that the power supply is normal. Second, if the over-current protector trips, reset it by clicking the reset button.
What to do if my BESEN Battery Charger has no reaction after plugging in the cable?
If your BESEN Battery Charger shows no reaction after plugging in the cable, it might be due to an invalid connection or the EV being non-rechargeable. Ensure the EV is flameout and then reconnect.
Explains the meaning of Danger, Warning, and Attention symbols used in the manual.
Lists main technical parameters like model number, rated voltage, and frequency.
Outlines essential conditions for installation, including foundation, space, humidity, and environment.
Provides step-by-step instructions for both pole-stand and wall-mounted installation methods.
Step-by-step guide for connecting power, checking indicators, and starting the charging process.
Lists common issues like 'Power light is off' or 'Fault light is red' with cause analysis and solutions.
Explains warranty periods, evidence requirements, and conditions under which assurance is not provided.
General| Brand | BESEN |
|---|---|
| Model | BS-B10 |
| Category | Battery Charger |
| Language | English |
To Next Page