Progamming command reference
Commd Description Code 1 Code 2
00 Begin programming
10 Add PIN PIN Group (1–5)
11 Delete PIN PIN
12 Set privileges 0,1,2 or 3*
13 Delete group Group (1–5)
14 Enable group Group (1–5)
15 Disable group Group (1–5)
21 Set Group 1 Sprvsr PIN PIN repeat PIN
22 Set Group 2 Sprvsr PIN PIN repeat PIN
23 Set Group 3 Sprvsr PIN PIN repeat PIN
24 Set Group 4 Sprvsr PIN PIN repeat PIN
25 Set Group 5 Sprvsr PIN PIN repeat PIN
99 End programming
Commands only for the Administrator
20 Set Administrator PIN PIN repeat PIN
30
†
Set PIN length 3,4,5 or 6
32 Set unlock duration 1–60 (secs)
33
†
Reset all 33
*Enter 0 to allow no privileges, 1 for passage mode
only, 2 for deadbolt override only, or 3 to allow both.
†
Warning! These commands erase all programming
and set the Administrator PIN back to its default.
T80912/Rev A
www.bestaccess.com
1880935 ER7991-37 Apr 2003
To Previous Page
