BEST ACCESS SYSTEMS Keypad EZ User Manual

Keypad EZ Quick Reference
To program a lock
1 To start programming, press 00#.
2 Enter the Administrator PIN or Supervisor
PIN, then press #. The default PIN is 9998.
3 Enter the command, then press #. For
example, to add a user, press 10#. For a list
of commands, see the back side of this card.
4 Enter code 1 associated with the command,
then press #. For example, enter the PIN you
want to add: 1234#.
5 Enter code 2 if required, then press #. For
example, enter the group for the PIN: 1#.
6 Repeat steps 3–5 to add more users, or to
complete other programming commands.
7 To end programming, press 99#.
Tips
■ To cancel a command sequence, press
* *
#.
This will let you start the command over.
■ Skipping a code and pressing # will enter
the default value, if it exists. See the
Keypad EZ Programming Guide for a list of all
default values.

BEST ACCESS SYSTEMS Keypad EZ Specifications

General

Brand	BEST ACCESS SYSTEMS
Model	Keypad EZ
Category	Keypad
Language	English

Summary

Keypad Lock Programming Procedure

Start Programming Sequence

Initiate the lock programming by pressing 00#.

Administrator Authentication

Enter Administrator or Supervisor PIN, then press #. Default PIN is 9998.

Enter Programming Command

Input the desired command (e.g., 10# for adding a user) and press #.

Provide First Code

Enter the primary code for the command (e.g., new PIN 1234#) and press #.

Provide Second Code (If Required)

Enter the secondary code, such as group assignment (e.g., 1#), if needed, and press #.

Repeat for Additional Programming

Repeat steps 3-5 to add more users or complete other programming tasks.

End Programming Session

Conclude the programming process by pressing 99#.