BEST BUY essentials BE-HCL312 User Manual

Package contents
• RF Modulator
• Power adapter
• Quick Setup Guide
Required parts (not included)
• One composite AV cable with three RCA
connectors (yellow, red, and white) at each end
• One 75-ohm coaxial cable
Features
Connecting your RF Modulator
1 Connect a composite AV cable (not included) from
the AV output jacks (yellow for video; red and
white for stereo audio) of the source component
(for example, a Blu-ray/DVD player or a gaming
system) to the corresponding color-coded input
jacks on the RF Modulator.
Note: For mono AV components, use only the yellow and
white connectors of the composite AV cable.
ANT IN
T0 TV
CH 3/4
VIDEO IN
DC IN
AUDIO IN
Before using your new product, please read these instructions to prevent any damage.
RCA to Coax RF
Modulator
Quick Setup Guide
BE-HCL312
2 Connect the coaxial cable to the TV using one of
the following methods that matches your setup:
• If you have an RF TV source, such as a
cable/satellite box or TV antenna, connected to
the TV, disconnect that component from the TV
and connect the coaxial cable to the ANT IN
jack on the RF Modulator.
Connect a separate coaxial cable from the TO
TV jack on the RF Modulator to the RF input jack
on the TV.
• If you do not have an RF TV source, connect a
coaxial cable from the TO TV jack on the
RF Modulator to the RF input jack on the TV.
Note: If your TV has only 300-ohm VHF screw
terminals, use a 75-ohm-to-300-ohm matching
transformer to complete the connection.
3 Connect the power adapter to the DC IN jack on
the RF Modulator, then plug it into a standard
120V AC outlet.
HD TV
From TV antenna
OR
RF Source
OR
RCA Source
Composite (AV)
cable
Coaxial cable
(with F connector)
From cable/satellite box
Game console
DVD/Blu-ray player
RF modulator

BEST BUY essentials BE-HCL312 Specifications

General

Brand	BEST BUY essentials
Model	BE-HCL312
Category	Modulator
Language	English

Summary

Package Contents

Required Parts Not Included

Features

Connecting Your RF Modulator

Connect AV Cable

Connect a composite AV cable from the source component's AV output to the modulator's input jacks.

Connect Coaxial Cable to TV

Connect the modulator's TO TV jack to the TV's RF input jack using a coaxial cable.

Connect Power Adapter

Connect the power adapter to the DC IN jack on the RF Modulator and plug into an outlet.

Using Your RF Modulator

Set TV Channel

Turn on the TV and set it to either Channel 3 or 4, not used for regular broadcasts.

Match Modulator Channel

Set the RF Modulator's CHANNEL 3/4 switch to the same channel as the TV.

Power on AV Component

Turn on the AV component connected to the RF Modulator.

Switch to Antenna/Cable Input

For antenna/cable, turn off AV component; modulator switches to ANT IN.

Legal Notices

FCC Part 15 Compliance

Device complies with FCC Rules, subject to conditions preventing harmful interference.

Canadian ICES-003 Compliance

This Class B digital apparatus complies with Canadian ICES-003 standards.

Important Safety Instructions