Best ICF6 - Remote Control; Linking Remote to Hood; Remote Control Functions; Battery Disposal

- 7 -
FIG. 2 FIG. 3
P5
P4
P3
P2
P1
INDICATOR
LIGHT
HOOD CONTROL
Remote Control Functions (Fig.2)
See Controls section on previous page for more information on each function.
Delay - Off
Blower Speed Decrease and Off
Blower Speed Increase and On
Light
CAUTION RISK OF EXPLOSION IF BATTERY IS
REPLACED BY AN INCORRECT TYPE. DISPOSE
OF USED BATTERY TO THE INSTRUCTION.
Battery disposal
When the batteries need to be replaced, dispose of them only and exclusively in the numerous
readily available special waste bins, especially in shops selling electronic consumer goods.
Observance of the regulations on differentiated waste collection, in particular, proper disposal of
used batteries, contributes to preventing possible negative effects on the environment and health.
REMOTE CONTROL
The remote control is linked to the hood at the factory.
If, for some reason, the link is lost - follow the directions below:
To Link Remote Control to Hood
1. Turn off hood motor and hood lights.
2. Press on the remote control for at least 3 seconds and release the button. The indicator
light will light up (Fig. 2).
3. Within 3 seconds press P5 on the hood control (Fig. 3). The BEEP confim that the
linking process was successful.