To Next PageTo Next Page
Need help?Do you have a question about the Bestgreen BM135B92HRBK and is the answer not in the manual?
Read instructions, understand controls, and get professional training for safe operation.
Inspect for fire risk, remove debris, wear proper clothing, and clear the area before use.
Operate safely on level ground, avoid slopes over 15°, use caution on slopes, and follow all operational rules.
Keep equipment tight, store safely, clean regularly, and replace worn parts for safe operation.
Assemble steering wheel components, align wheels, and ensure steering wheel bar is perpendicular to tractor axis.
Attach seat securely, adjust for operator comfort, and ensure safety switch is connected.
Install battery, connect terminals correctly, and handle with care. Charge if necessary.
Adjust gauge wheels for proper cutting height and terrain conditions to prevent scalping.
Assemble bagger support brackets, tube, and discharge chute to the tractor for grass collection.
Adjust bagger position horizontally and vertically for proper fit and function with the tractor.
Assemble and install the mulcher plug for converting the mower to mulching function.
Identify and understand the function of all controls on the tractor's dashboard for proper operation.
Regulates engine revs and blade rotation speed for optimal cutting performance.
Activates brakes and disengages the motor when pressed, ensuring safe operation.
Controls tractor speed and direction (Neutral, Slow, Fast, Reverse) for maneuverability.
Engage/disengage cutting unit drive and adjust cutting deck height for transport or terrain.
Controls engine operation (OFF, ROS ON, ON, START) for starting and securing the tractor.
Engages the parking brake by pressing the pedal and lifting the lever to secure the tractor.
Controls the cold start mixture for easier engine starting in cold conditions.
Fill the engine with unleaded petrol outdoors, avoid overfilling, and ensure the cap is tight.
Check engine oil level regularly using the dipstick and add SAE 30 or SAE 5W-30 as needed.
Check and maintain correct tire pressure for optimal tractor handling and safety.
Ensure cutting unit is in transport position, motion lever is in neutral, and engage controls before starting.
Operate engine at desired speed, use choke only if needed, and turn key to START for ignition.
Remove trapped air from the transmission before first use or after service for proper operation.
Lower cutting unit, release pedals slowly, engage controls, and select appropriate speed for terrain.
Understand and use the ROS for safe reverse operation with attachment clutch engaged.
Clear debris, avoid obstacles, start with high cut, mow often, and avoid wet grass for best results.
Turn off alarm, position tractor, disengage transmission, set brake, raise handle, and dump clippings.
Convert mower for mulching, rear discharging, or bagging by installing appropriate accessories.
Adjust cutting unit side-to-side and front-to-back for optimal cutting height and levelness.
Disconnect spark plug wire, press pedals, move lever to neutral, disengage clutch, switch off engine.
Drain hot engine oil using extension, reinstall plug, and fill with correct oil type.
Keep a record of all regular maintenance services performed on the tractor for optimal condition.
Keep fan and cooling fins of transmission clean for proper cooling. Do not clean while engine is running or hot.
Check fuel, plug, connections, carburetor, and fuel pipe for issues preventing engine start.
Check battery, cable contact, lever position, fuse, ignition lock, safety contacts, and pedal position.
Check gear, plug, carburetor setting, air filter, fuel tank ventilation, ignition setting, and fuel pipe.
Check air filter, plug, carburetor, and carburetor setting for performance issues.
Check for engine overload, blocked air inlet/fins, fan damage, oil level, ignition, and plug.
Check fuse, battery cells, and battery pole/cable contacts for charging issues.
Check for loose blades, engine, or blade imbalance causing vibrations.
Check blade sharpness, cutting unit alignment, grass conditions, debris, tire pressure, gear, and belt.
Clean machine, touch up paint, change oil, drain fuel, remove battery, and store indoors.
Provide model, type, serial number, and purchase date when ordering parts or for warranty service.
General| Brand | Bestgreen |
|---|---|
| Model | BM135B92HRBK |
| Category | Lawn Mower |
| Language | English |
