Need help?Do you have a question about the Bestway Field Pro III and is the answer not in the manual?
General| Brand | Bestway |
|---|---|
| Model | Field Pro III |
| Category | Paint Sprayer |
| Language | English |
Information about the sprayer's serial number for parts identification.
Explains the meaning of DANGER, WARNING, CAUTION, IMPORTANT, and NOTE symbols.
Detailed measurements of the sprayer's physical dimensions.
Lists tank volumes for sprayer, rinse, and chemical induction.
Details on the axle, spindle, and hub components.
Minimum horsepower and hydraulic capacity needed for the tractor.
Identifies the locations of safety decals on the sprayer.
Instructions on how to maintain and install safety signs.
Guidelines for safe handling of agricultural chemicals.
Safety precautions related to the sprayer's mechanical components.
Safety guidelines for operating, transporting, and following sprayer use.
Compliance with laws for safe movement on public roads.
Steps for connecting the sprayer to the tractor.
General instructions for installing spray controller units.
Steps for preparing the sprayer itself before operation.
Detailed installation guide for the Raven 450 controller.
Detailed installation guide for the Raven 440 controller.
Procedures for filling the 1,200-gallon sprayer tank.
How to use the fill meter and enter data into the controller.
Instructions for using the chemical induction system for adding chemicals.
How to operate sprayer booms using joysticks and special controls.
Techniques to manage spray drift and its influencing factors.
Guidance on selecting and managing spray nozzles and tips.
Procedures for rinsing the sprayer after use or chemical changes.
Procedures for cleaning the sprayer after use.
Information on lubricating grease fittings and wheel bearings.
Maintenance of line strainers, spray nozzles, and tips.
Adjusting the breakaway tension on boom sections.
Tire pressure, wheel bearing replacement, and tread width adjustment.
Steps to prepare the sprayer for long-term storage.
Troubleshooting common operational issues with the sprayer.
Diagnosing issues with boom valves, nozzles, and control systems.
Troubleshooting pump issues like no liquid or low pressure.
Parts list for the main frame and tank components.
Detailed parts breakdown for the base plumbing system.
Parts lists for Pro 60 and Pro 80 boom assemblies.
Schematics and parts for hydraulic systems, pumps, and cylinders.
Parts for quick fill meter, foam guidance, inductor, rinse, plumbing stacks.
Wiring harness information for the sprayer's base electrical system.
Wiring specifics for the control valves.
To Next Page
