12
NOTE:
Before connecting valve to the pool, fill the pool leaving 2-2.5 in (5-6cm) of space between the position of the connection valve
and water surface.
WARNING! Never permanently install the connection valve before the water is within a few centimeters of them because the liner
has to be properly taut from the pressure of the water.
NOTE: Be careful the splinters or any sharp edges when cutting the pool.
IMPORTANT: Cutting more liner than necessary will damage and void the pool liner, so please trim with extra care.
6 cm
2-2.5 in.
(5-6 cm)
#17
#18
A
B
C
D
20
21
22
To Next Page
Loading...
