Why is my Bestway Swimming Pool water not clean?
If the water in your Bestway Swimming Pool isn't clean, it could be due to several reasons. You may not be filtering the water for long enough; try increasing the filtration time. Also, check the filter cartridge and clean or replace it if it's dirty. Improper water maintenance can also be a factor; refer to the chemical manufacturer’s instructions for guidance.
What to do if my Bestway Lay-Z-Spa Havana Swimming Pool pump does not operate?
If your Bestway Swimming Pool pump isn't working, the issue might be with the power source. Check the power source to ensure it is functioning correctly and that the power circuits are not broken.
Why is the Wi-Fi setup not successful on my Bestway Lay-Z-Spa Havana?
A failed Wi-Fi setup on your Bestway Swimming Pool can stem from several causes. Ensure your pump is connected to a 2.4GHz network, as 5GHz networks are not supported. Check if the spa pump is too far from the router by verifying the Wi-Fi signal strength with your cell phone. Also, double-check that you've entered the correct Network Name and Wi-Fi password during the connection process. Unstable Wi-Fi signals or interference from nearby appliances can also disrupt the connection. Lastly, confirm that airplane mode is deactivated on your mobile device during registration.
What to do if my Bestway Lay-Z-Spa Havana control panel is not working?
If the control panel on your Bestway Swimming Pool isn't working, it might be auto-locked after 5 minutes of inactivity. Look for the lock icon on the LED display; if highlighted, press the button for 3 seconds to unlock it. If it remains locked, try restarting the pump by unplugging it and plugging it back in. Also, ensure that the control panel is activated by pressing the on/off button for 2 seconds.
What to do if my Bestway Lay-Z-Spa Havana Swimming Pool pump does not heat properly?
If your Bestway Swimming Pool pump isn't heating properly, first check if the temperature is set too low and adjust it to a higher setting. A dirty filter cartridge can also cause this issue, so clean or replace it. Also, the thermal cut-out may have activated; unplug the pump and let it cool down until the water temperature reaches 35°C (95°F) or lower before restarting. Make sure the spa is covered to retain heat.
What to do if my Bestway Lay-Z-Spa Havana has a spa pool leakage?
If your Bestway Swimming Pool is leaking, inspect it for tears or punctures and use the provided repair patch to fix them. Also, check if the air valve is loose by applying soapy water to it; if air bubbles appear, use the provided wrench to tighten the air valve. Deflate the spa first, then hold the backside of the air valve from inside the spa wall and turn the wrench clockwise.
What to do if the Lay-Z-Massage System does not work in my Bestway Lay-Z-Spa Havana Swimming Pool?
If the Lay-Z-Massage System in your Bestway Swimming Pool isn't working, the air pump may be overheating. Unplug the pump and wait two hours for it to cool down, then plug it back in and press the Lay-Z-Massage System Button. Also, the Lay-Z-Spa Massage stops automatically, so press the Lay-Z-Massage System Button to reactivate it.
Why are the pump adapters not level with the spa adapters on my Bestway Swimming Pool?
The pump adapters might not be level with the spa adapters on your Bestway Swimming Pool because PVC can change shape, which is normal. To fix this, elevate the pump with wood or another type of insulated material to bring the pump's adapters level with the spa's adapters.
General| Brand | Bestway |
|---|---|
| Model | Lay-Z-Spa Havana |
| Type | Inflatable Hot Tub |
| Capacity | 4-6 people |
| Number of Jets | 120 |
| Energy Saving Timer | Yes |
| Freeze Shield | Yes |
| Water Capacity | 669 liters |
| Inner Size | 132 cm |
| Actual Water Flow | 1, 325 L/h |
| Max Temperature | 40°C |
| Power | 2050 W |
| Certification | CE |
| Massage System | Air jets |
| Pump Type | Integrated pump |
| Included Accessories | filter cartridge |
| Material | TriTech 3-ply reinforced material |
Details specific requirements and considerations for setting up the spa indoors, including humidity effects.
Provides guidance for outdoor spa placement, emphasizing proximity to floor drains and avoiding direct sunlight.
Instructions to examine equipment before use and notify customer service of any damaged or missing parts.
Guidance for setting up the spa during winter to prevent damage and ensure proper operation of the Freeze Shield system.
Instructions for locking/unlocking the control panel and setting the power-saving timer.
How to activate and use the spa's heating and massage features.
How to turn the spa on/off, adjust temperature, change units, and operate the water filter.
Guides on Wi-Fi activation and understanding the power-saving timer LED status.
Instructions for adding air to the spa and cleaning the spa cover periodically.
Steps for checking and cleaning filter cartridges daily and recommendations for replacement.
Guidance on maintaining spa water quality, including cleaning, chemical balance, and water changes.
Recommendations for using chemical tablets or liquids, testing water chemistry, and important precautions.
Step-by-step instructions for draining the spa water before disassembly and storage.
Instructions for cleaning the spa walls and deflating the spa for packing and storage.
Procedures for repairing tears or punctures in the spa's PVC material using provided patches.
Solutions for common problems like the pump not operating, not heating, or the massage system not working.
Advice on maintaining clean water, resolving PRCD test failures, and fixing control panel issues.
Troubleshooting steps for spa pool leakage, water leaks from adapters, and unsuccessful Wi-Fi setup.
Explains error codes related to water flow sensor issues and their potential causes and solutions.
Troubleshoots error codes for incorrect water temperature readings and connection issues.
Addresses errors related to thermal cut-outs, Wi-Fi module failures, and ground connection problems.
To Next Page