How to clean Bestway Swimming Pool water?
If your Bestway Swimming Pool water isn't clean, try these steps: * Increase the filtration time. * Clean or replace the filter cartridge, referring to the Filter Cartridge Cleaning and Replacement section. * Refer to the chemical manufacturer’s instructions for proper water maintenance.
Why is my Bestway LAY-Z-SPA S200202 pump not heating properly?
If your Bestway Swimming Pool pump isn't heating properly, try these steps: * Set the spa to a higher temperature, referring to the pump operation section. * Clean or replace the filter cartridge, following the instructions in the filter cartridge cleaning and replacement section. * Unplug the pump and let it cool in a dry place until the water temperature reaches 35°C (95°F) or lower before restarting. * Ensure the spa is covered. If these steps don't resolve the issue, further assistance may be needed.
How to fix water leaks from Bestway LAY-Z-SPA S200202 pump adapters?
If you find water leaking from the adapters between the pump and your Bestway Swimming Pool spa, try the following: 1. Insert the stopper caps on the spa ports to stop water from escaping, then disconnect the pump and check the seals are in place. 2. If the seals are out of position, open the gears and reposition them correctly. 3. Connect the pump to the spa, hand-tightening the adapters. Remove the stopper caps. If leakage continues, tighten the adapter until it stops.
What to do if Bestway LAY-Z-SPA S200202 massage system does not work?
If your Bestway Swimming Pool massage system isn't working, it might be due to the air pump overheating. Unplug the pump and allow it to cool down for two hours. After cooling, plug it back in and press the Massage System Button to reactivate.
How to unlock Bestway LAY-Z-SPA S200202 control panel?
If the control panel of your Bestway Swimming Pool is not working, it might be locked. The control panel has an auto-lock feature that activates after 5 minutes of inactivity, indicated by a lock icon on the LED display. To unlock it, press the button for 3 seconds. If it remains locked, try restarting the pump by unplugging it and plugging it back in.
What to do if Bestway Swimming Pool has a leak?
If you notice spa pool leakage in your Bestway Swimming Pool, check for tears or punctures and use the provided repair patch to fix them. Also, inspect the air valve for looseness. Using soapy water, cover the air valve to check for leaks. If air is leaking, tighten the air valve clockwise.
How to level Bestway Swimming Pool pump adapters?
Due to PVC characteristic, pump adapters may not be level with the spa adapters in Bestway Swimming Pool. Elevate the pump using wood or another insulated material to align the pump's adapters with the spa's adapters.
General| Brand | Bestway |
|---|---|
| Model | LAY-Z-SPA S200202 |
| Type | Inflatable Hot Tub |
| Capacity | 4-6 people |
| Temperature Range | 68-104℉ |
| Max. Heat Capability | 104°F |
| Included Accessories | chemical floater, repair patch |
To Next Page