Bestway HYDRO-FORCE 65023 User Manual

S-S-000753
S-S-000753/21x28.5cm(65023/65031） JS-YF-2009-B-00339/封面
HYDRO-FORCE™ INFLATABLE
BOAT OWNER’S MANUAL
www.bestway-service.com
MODEL: #65023/#65031
PLEASE CAREFULLY READ THIS MANUAL BEFORE USING YOUR BESTWAY®
INFLATABLE BOAT. KEEP IT FOR FUTURE REFERENCE.
Design Category D “SHELTERED WATERS”
SHELTERED WATERS: Designed for voyages on sheltered coastal waters, small bays, small lakes, rivers and
canals when conditions up to, and including, wind force 4 and significant wave heights up to, and including, 0,3 m
may be experienced, with occasional waves of 0,5 m maximum height, for example from passing vessels.
geprüfte
Sicherheit
I
D
:
1
0
0
0
0
0
0
0
0
0
w
w
w
.
t
u
v
.
c
o
m
TÜV heinland Group R

Bestway HYDRO-FORCE 65023 Specifications

General

Model Number	65023
Type	Inflatable Boat
Brand	Bestway
Capacity	3 persons
Material	PVC
Color	Blue
Maximum Weight Capacity	270 kg
Length	291 cm
Width	127 cm
Included Accessories	1 pair of oars, 1 pump

Summary

Bestway Inflatable Boat Owner's Manual

Manual Usage and Reference

Instruction to read and keep the manual for future reference before using the boat.

Design Category Information

Specifies the boat's design category (D) and suitability for sheltered waters.

Technical Specifications

Model Diagrams

Diagram of Model #65031

Illustrative diagram showing the layout and components of the Bestway #65031 inflatable boat.

Diagram of Model #65023

Illustrative diagram showing the layout and components of the Bestway #65023 inflatable boat.

Parts Identification Legend

Table listing and identifying numbered components shown in the boat diagrams.

Safety and Compliance

General Warning: Data Plate Compliance

Warning to avoid damage and injury by not exceeding data on the builder's plate.

Assembly Diagrams

Floor and Keel Installation Illustrations

Diagrams illustrating the correct assembly of floorboards and inflatable keel.

Oar and Motor Mount Illustrations

Diagrams showing the assembly and attachment of oars and outboard motor mount.

Assembly, Operation, and Care

Floor and Hull Assembly Instructions

Step-by-step guide for assembling floors and inflating the boat's hull chambers.

Component Installation and Setup

Instructions for installing seat boards, oars, and outboard motors.

Storage, Deflation, and Repairs

Procedures for cleaning, deflating, storing the boat, and performing basic leak repairs.

Safety Guidelines and Cautions

Crucial safety advice, usage precautions, and warnings for operating the inflatable boat.

Warranty Information

Limited Manufacturer's Warranty Details

Information on Bestway's limited warranty and coverage for manufacturer's defects.

Warranty Claim Procedure

Steps and required information for submitting a warranty claim to Bestway.

Customer Service and Contact

Bestway Service Department Directory

Contact information for Bestway service centers across various countries.