4
ISTRUZIONI PER L’USO
I
INSTRUCTIONS FOR USE
EN
OPERATION MANUAL AND INSTRUCTIONS FOR MOBILE ROLLER CAB MANUFACTURED BY:
BETA UTENSILI S.P.A.
Via A. Volta 18
20845 Sovico (MB) ITALIA
Original documentation drawn up in ITALIAN.
Store the safety instructions with care and hand them over to the users.
TECHNICAL DATA
• Weight: 58 kg
• Maximum capacity of mobile roller cab: 300 kg (mobile roller cab plus load)
• Maximum applicable static load, uniformly distributed on surface: 800 kg
• Drawer capacity:
All stated capacities should be considered to be uniformly distributed on surfaces.
PURPOSE OF USE
The mobile roller cab should be used for the storage and transportation of tools and equipment in work
environments, according to such load capacities as listed in this manual.
WARNINGS OF USE
• Use the roller cab on at, stable surfaces.
• Do not exceed the maximum capacity of each drawer and the roller cab as a whole.
• Do not open more than one drawer at a time, to avoid overturning.
• Do not use the roller cab for any applications other than those listed above.
• Do not modify the roller cab or any of its parts.
• Store the roller cab in closed environments, sheltered from the bad weather.
• In case of use with portable tool chests C22S, C23S, C23SC, C23ST and C39T, the load should be
uniformly distributed on the drawers, thereby avoiding overloading the top. The overall weight should
always be lower than the maximum capacity of the roller cab.
MAINTENANCE
Maintenance and repair jobs must be carried out by trained personnel only. For such jobs, you can
contact Beta Utensili S.P.A.’s repair centre through your Beta dealer.
DISPOSAL
The roller cab, accessories and packaging should be sent to a waste disposal centre, in accordance
with the laws in force in your country.
IMPORTANT! READ THIS MANUAL THOROUGHLY BEFORE USING THE
ULTRASONIC CLEANER. FAILURE TO COMPLY WITH THE SAFETY
STANDARDS AND OPERATING INSTRUCTIONS MAY RESULT IN
SERIOUS INJURY
CAUTION
70 mm 25 kg
140 mm 30 kg
210 mm 30 kg
To Next Page
Loading...