Beta L5000Plus User Manual

12109461L5000Plus QIG (Dwg #R17471-00, RevC) May, 2009
1
2
2.5mm
Quick Installation Guide
L5000Plus
Caution – Refer to accompanying documents
Caution – Risk of electric shock
Electrical installation of this equipment should only be performed by trained personnel in
accordance with local electrical wiring regulations (in North America. Refer to NEC and
CSA, C22.2 CEC Part 1). Before working with this equipment, isolate it from any electrical
source and lock out/tag out.
Detailed installation instructions for L5000Plus units can be found at:
http://www.johnsondiversey-equipment.com

Beta L5000Plus Specifications

General

Brand	Beta
Model	L5000Plus
Category	Dispenser
Language	English

Summary

Introduction and Safety Precautions

General Warnings and Guidance

Covers essential cautions, risk of electric shock, and requirement for trained personnel.

Detailed Installation Resources

Provides the URL for comprehensive installation instructions.

Physical Installation Steps

Unit Mounting and Marking

Illustrates mounting the main unit and marking positions on the wall.

Screw and Fixing Selection

Emphasizes using screws suitable for the specific wall material.

Securing the Main Unit

Details the process of fastening the unit in place.

Electrical Connections and Control System

Wiring Diagram for Pumps

Shows the electrical connections for pumps 1-7.

Optional TR8000L Integration

Details the connection and function of the optional external control box.

TR8000 L Operating Modes

Explains trigger signals and modes for pump operation.

Optional Features and Power Requirements

Optional Alarm Configuration

Illustrates the wiring for an optional alarm system.

Power Input Specifications

Specifies the voltage and frequency range for power input.

Final Unit Securing

Shows the final step of securing the unit to its mounting bracket.

System Wiring and Pump Connections

Pump and Manifold Attachment

Details how to attach the pump and manifold assembly.

Overall System Wiring Diagram

Provides a comprehensive overview of system component wiring.

Connecting Pumps to Main Unit

Illustrates the connection of pumps to the main unit.

Troubleshooting and Final Check

Installation Clarity Check

Depicts a common point of confusion and its resolution during setup.