Nano Bay
SETUP BIND
Audio Port Type-C Port
4.1 Switch Functions
Four switches are provided on the front of the remote control radio transmitter: switch
SA, switch SB, switch SC, and switch SD, as shown below. Pilot can change different
modes and parameters of the quadcopter with these switches. Please take notice that
these switch can only work after the remote control radio transmitter is successfully
connected to the quadcopter.
Switch SA: Arm/Disarm Quadcopter
• Quadcopter will be disarmed if switch SA is up.
• Quadcopter will be armed if switch SA is pressed
To Next Page
Loading...
