Product List!
1*Meteor75 Micro FPV Quad 1*USB Charging Cable
1*LiteRadio 2 Radio Transmitter 2*Goggle Antennas
1*BETAFPV VR01 FPV Goggle 1*Prop Removal Tool
2*450mAh 1S Lipo Battery 4*40mm 3-Blade Prop
1*BT2.0 Battery Charger and Voltage Tester 1*Portable Storage Bag
Meteor75!
●
Power On/Off: connect the power cable of Meteor75 to the battery, the power
LED, receiver LED and FC LED are on, then the FC LED flashes and the
receiver LED turns off. After using, unplug the connection, and all LED will turn
off.
●
Battery: connect the battery to the voltage tester to display the current voltage
value of the battery.
●
Charge: connect the battery to the output (OUT1/2) of the charger supplied with
the adapter or other 5V power. The LED will show red light when charging; the
LED will show green light when finishing charging.
To Next Page
Need help?
General
