4.4 Charging the Remote Control Radio Transmitter
The remote control radio transmitter has a built-in 2000mAh battery. External battery is
not required If LED ring breathes in red and beeps twice, it indicates that the battery is
low and needs to be recharged. Steps to charge the remote control radio transmitter
battery:
• Turn off the remote control radio transmitter;
• Connect remote control radio transmitter and adapter with the Type-C cable. (5V
output adapter is allowed, such as mobile phone charger);
• The LED ring breathes in red means charging, while in green means ful y charged
Output 5V
Type-C Port
Note: Fast charging protocol is not supported So radio transmitter can not be quickly charged.
17
To Next Page
Loading...
