5.4 Charging the FPV Goggles
The FPV goggles have a built-in 2000mAh battery and no external battery is required
When voltage is below 3.4V, there will be a beep every IOS and this indicates the battery
needs to be recharged User can also press the S button to check the voltage Steps to
charge the goggles battery is as follows:
• Switch off the FPV goggles;
• Connect FPV goggles and adapter with the Type-C cable (5V output adapter is
allowed, such as mobile phone charger);
• The power light will be blue when charging and ights out when fully charged
Output 5V
Type-C Port
Note: Fast charging protocol is not suppoHed. So FPV goggles can not be quickly charged.
24
To Next Page
Loading...
