BETAFPV Micro RF TX module is based on ExpressLRS project,
open source RC link for RC applications. ExpressLRS aims to
achieve the best possible link peormance in both speed, latency
and range. This makes ExpressLRS become one of the fastest RC
links available while still oering long-range peormance.
Github Project Link: https://github.com/ExpressLRS
Facebook Group: https://www.facebook.com/groups/636441730280366
The ExpressLRS ocal project does NOT suppo the OLED function for the
moment. BETAFPV team has made a pull request on Github and wait for the
ocal to nish this merge. Please get the rmware from BETAFPV Github
nowadays until ExpressLRS ocal suppo.
https://github.com/BETAFPV/ExpressLRS
● Frequency bands ( 2.4GHz version): 2.4GHz ISM
● Frequency bands ( 915MHz/868MHz version): 915MHz FCC/868MHz EU
● RF output power: 25mW/50mW/100mW/250mW/500mW (2.4GHz)
100mW/250mW/500mW (915MHz/868MHz)
● Packet refresh rate: 50Hz/150Hz/250Hz/500Hz (2.4GHz)
25Hz/50Hz/100Hz/200Hz (915MHz/868MHz)
● Input voltage: 5-12V (2S)
● USB po: Type-C
Specifications
XT30 Po(2S)
USB Type-C
Fan+RGB
5D Button
OLED Screen
GH1.25 (GND, 5V, CRSF)
Note: Please DO NOT use 3S or above bette to power up the TX module.
Otherwise, the power supply chip in the TX module will be damaged
permanently.
To Next Page
Loading...