Need help?Do you have a question about the Beuchat Mundial 2 and is the answer not in the manual?
General| Category | Diving Knife |
|---|---|
| Material | Stainless Steel |
| Type | Fixed Blade |
| Blade Material | Stainless Steel |
| Sheath Material | Plastic |
Details the components and icons of the full liquid crystal display.
Explains the four control buttons (M, S, L, A) for mode selection and operation.
Describes the hierarchy and transitions between different operating modes.
Outlines how the device functions as a dive gauge, including mode access.
Details connecting the device to a PC for data transfer and settings management.
Explains the use of alpha-numeric displays for messages and status.
Describes the device's audible alarm functions and notification types.
Explains how to activate, deactivate, and manage the backlight feature.
Details the battery type, life, and low battery warning indicators.
Covers setting and displaying the primary home time and its related icons.
Provides instructions for setting the device's date and time format.
Explains setting and displaying time for a remote travel location.
Details how to adjust time settings based on geographical time differences.
Describes the setup and operation of the countdown timer.
Explains the functions of the stopwatch and lap timer.
Details how to set and manage the daily alarm function.
Describes how time, date, depth, and temperature are displayed in surface mode.
Covers the main surface mode operations and display elements.
Details the status display for the Free Mode Countdown Timer.
Provides instructions for setting the Free Mode Countdown Timer.
Describes an alternative display in Surface Mode.
Explains how dive log data is stored and accessed.
Covers configuration of audible, SRT, EDT, RDI, DD alarms.
Details the audible alarm ON/OFF setting and its function.
Explains setting the Surface Recovery Time alarm.
Details setting the Elapsed Dive Time alarm.
Explains setting the Repeating Depth Interval alarm.
Covers the setup for descending depth alarms.
Details setting the first descending depth alarm.
Details setting the second descending depth alarm.
Covers configuration of water type, DSD, units, backlight, and BDSI.
Explains selecting water type for accurate depth calibration.
Details setting the Dive Start Depth for dive mode activation.
Covers selection between Metric and Imperial units.
Explains setting the duration the backlight stays on.
Details setting the Between Dive Surface Interval time.
Provides information on the device's serial number and firmware version.
Details the primary display for dive operations, showing depth and elapsed time.
Shows the status of the Countdown Timer during a dive.
Displays time and temperature information during a dive.
Explains the operation and alert for the countdown timer during dives.
Details the alert for elapsed dive time intervals.
Explains the alert for repeating depth intervals during descent.
Covers the setup for descending depth alarms.
Details the post-dive alert for surface recovery time.
Lists the necessary hardware and software for PC interface connectivity.
To Next Page
