> 51VX 200 Iceberg / User guide
WARNING : Cold water diving requires special equip-
ment and training. Failure to follow the above instructions
and recommendations can result in serious injury or
death. Certified instruction should be received and com-
pleted for cold water and ice diving from a certified ins-
tructor by a recognized training agency prior to attemp-
ting any cold water or ice diving.
Note :
• The V200 first stage 3/8" LP ports can accommodate
the safe second stage octopus and the buoyancy com-
pensator LP hose and / or drysuit inflator hose.
• On the 7/16" HP port, install a pressure gauge to check
air supply during the dive.
• A 3000/3300 psi DIN and 4400 psi DIN connection kit
can be installed on the V200 first stage by a BEUCHAT
authorized dealer.
• A 3000/3300 psi DIN to yoke adapter is available under
ref. #16740 to allow the mounting and the use of a DIN
regulator on a standard K-valve cylinder.
Notice Detendeurs 07-2008 int.qxd 31/07/08 15:46 Page 51
To Next Page
Loading...
