Beurer BR 10 - Operating the Device

46
the area that has been stung or bitten and itching and swelling have already
started, the insect bite healer can only have a limited eect. Nevertheless,
treat the area with the insect bite healer. Usually, itching can be relieved and
healing can be sped up.
1. Slide the ON/OFF switch
2
towards the heating plate
4
with the symbol
“I” for ON. The device status LED
3
lights up green and indicates to you
that the device is ready to use.
2. Place the heating plate
4
of the device on the area that has been stung
or bitten. Press the activation button
1
once. The device status LED
3
lights up blue and signals that the application is starting.
3. After the end of the application, an acoustic signal sounds, heating of the
heating plate
4
stops automatically and the device status LED
3
lights
up green again. Remove the heating plate
4
from the area of skin once
the signal sounds.