47
IMPORTANT
Depending on the sensitivity of the person using the device and of the area
of skin, the treatment temperature may feel unpleasant and cause slight skin
redness and, in rare cases, irritated skin. If the heat function feels too hot,
stop treatment immediately.
4. If required, you can use the heat function of the insect bite healer on the
sting/bite again after a break of 2 minutes or also use it immediately on an-
other sting/bite in a dierent area. The maximum number of 5 applications
per hour on the same treatment area must not be exceeded.
5. If the device is no longer required, set it to “OFF” again using the ON/OFF
switch
2
. This is indicated by the “O” symbol. The blue device status LED
3
turns o.
6. Before storing, make sure that the device is switched o and the heating
plate
4
has cooled down.
To Next Page
