To Next PageTo Next Page
Need help?Do you have a question about the Beurer BY 110 and is the answer not in the manual?
General| Type | - |
|---|---|
| ECO mode | Yes |
| Maximum range | 300 m |
| Channels quantity | 21 channels |
| Number of lullabies | 4 |
| Display type | LCD |
| Certification | CE |
| Product color | Grey, White |
| Volume control | Buttons |
| Recommended gender | Boy/Girl |
| Transmitter power source | Battery |
Details the features and components of the baby monitoring camera unit.
Details the features and components of the parent monitoring unit.
Explains the icons and information displayed on the parent unit screen.
Instructions for initial charging and setup of the device before first operation.
Steps for setting up and powering on the baby camera unit.
Guidance on inserting and securing the battery in the parent unit.
Instructions for connecting and powering the parent unit via mains adapter.
How to control the audio volume level on the parent unit.
How to adjust the screen brightness level on the parent unit.
Instructions for using the two-way communication feature.
Overview of configurable settings available in the parent unit menu.
How to activate and use the digital zoom feature on the parent unit.
Instructions for selecting and playing lullabies from the parent unit.
How to set and activate the timer function on the parent unit.
Procedure for pairing and connecting additional cameras to the parent unit.
Steps to remove a paired camera from the parent unit.
How to choose which camera feed or view to display on the parent unit.
Adjusting the microphone sensitivity for voice-activated monitoring.
Guidance on choosing the correct transmission frequency for optimal signal.
How to activate and configure the power-saving screen off feature.
Setting the display for room temperature in Celsius or Fahrenheit.
Configuring high and low temperature alerts for the monitored room.
Instructions for enabling and activating the motion detection alert.
Procedure to restore the parent unit to its original default settings.
