L
Linda NelsonJul 28, 2025
What to do if my Beurer gs 203 Scales display 'Lo'?
- MMr. Daniel DavenportJul 28, 2025
If your Beurer Scales display 'Lo', it indicates low power. You should change the battery to resolve this issue.
To Next PageTo Next PageWhat to do if my Beurer gs 203 Scales display 'Lo'?
If your Beurer Scales display 'Lo', it indicates low power. You should change the battery to resolve this issue.
What to do if Beurer gs 203 show Lo?
If your Beurer Scales display 'Lo', it indicates low power. You should change the batteries.
What to do if Beurer Scales show Err?
If your Beurer Scales display 'Err', it means the maximum weight capacity of 330 lb (150 kg / 24 st) has been exceeded. To resolve this, ensure that you weigh only up to the maximum permissible weight.
What to do if my Beurer gs 203 Scales display 'Err'?
If your Beurer Scales display 'Err', it means the maximum weight capacity of 330 lb (150 kg / 24 st) has been exceeded. To resolve this, ensure that you weigh only up to the maximum permissible weight.
Why do my Beurer gs 203 Scales show unrealistic results?
If your Beurer Scales show an unrealistic result, wait until the scale switches off automatically, and then repeat the measurement. Make sure to place the scale on a hard, level floor (avoid carpets) and remain still during weighing.
General| Type | Electronic personal scale |
|---|---|
| Shape | Square |
| Accuracy | 0.1 g |
| Easy to clean | Yes |
| Product color | Black |
| Units of measurement | kg, lb, st |
| Maximum weight capacity | 150 kg |
| Minimum weight capacity | 0.1 kg |
| Body Mass Index (BMI) measuring | - |
| Battery type | CR2032 |
| Battery voltage | 3 V |
| Number of batteries supported | 2 |
| Digit size | 40 mm |
Weight and Dimensions| Width | 300 mm |
|---|---|
| Height | 19 mm |
Defines WARNING, CAUTION, and NOTICE symbols used in the manual.
Outlines critical precautions such as not jumping on the scale or using it when wet.
Provides guidance on factors affecting accurate weight measurement.
Covers scale capacity, unit increments, and unit selection.
Instructions for initial scale setup and resetting to zero.
Step-by-step guide on how to use the scale for weighing.
Lists common error codes and their solutions for the scale.
