Beurer GS 39 - Weight Measurement Features; Error Displays and Overload; Weighing with Storage Function; Retrieving Stored Values

16
If the scale detects an error during weighing, “ ---- ” or “ ” appears in the
display (Fig. 4+5).
Display DE EN FR ES RU
Fehler Error Erreur Error Неисправность
Fig. 5
Fig. 4
If a weight of more than 150 kg is placed on the scale, “OVEr” is displayed
(Fig. 6).
Fig. 6
Display DE EN FR ES RU
Überlastung Overload Surcharge Sobrecarga Перегрузка
Make sure that you always switch on the scale first and wait for the display “ 0.0 ” (Fig. 2) before step-
ping on.
6.3 Weighing with storage function
The scale has 4 memory spaces (pushbuttons 1-4).
Switch on the scale as described in "6.2. Measuring weight"and wait until the display shows "0.0"
(Fig. 2).
Now press the desired storage location (1, 2, 3 or 4).
For example, press the "1" button that appears in the upper left-hand corner of the display "User 1".
Display DE EN FR ES RU
User 1 Benutzer 1 User 1 Emplacement
de mèmoire 1
Usuario 1 Пользователь 1
Now the scale is ready to measure your weight, as described in 6.2.
The measurement is automatically saved in the respective user memory. If necessary, a previous
measurement is exceeded.
6.4 Retrieving the stored values
Press the button for the desired storage location when the scale is switched o. The saved measure-
ment is shown.
Display DE EN FR ES RU
User 1
62,4 kg
Benutzer 1
62,4 kg
User 1
62,4 kg
Emplacement
de mémoire 1
62,4 kg
Usuario 1
62,4 kg
Пользователь 1
62,4 kg