What to do if Beurer Bottle Warmer temperature does not increase?
If the temperature on the display of your Beurer Bottle Warmer doesn't increase and the device switches off, it might be due to a lack of water in the device. Unplug the device, let it cool, fill it with water, and then start the warming process again as described in the instructions.
Why is my Beurer JBY 52 food not warm enough?
If the food isn't warm enough after using your Beurer Bottle Warmer, it could be due to insufficient water in the device. To resolve this, unplug the device, allow it to cool down, then add enough water before starting the warming process again, following the instructions.
Why Beurer Bottle Warmer has no LED display?
If your Beurer Bottle Warmer's LED display isn't working, first ensure the device is correctly plugged into the mains. If the display remains off, switch off the device, unplug it, and return it to the retailer, as the device may be faulty.
What to do if Beurer JBY 52 does not switch on?
If your Beurer Bottle Warmer doesn't switch on after being plugged in, the reason might be that it is not correctly plugged in. Check that the mains plug is correctly plugged in.
Why Beurer JBY 52 Bottle Warmer leaks from the bottom?
If water leaks from the bottom of your Beurer Bottle Warmer during use, it indicates a device fault. Immediately switch off and unplug the device, drain the water, and return it to the retailer.
What to do if Beurer JBY 52 Bottle Warmer warming process does not start or end?
If the warming process on your Beurer Bottle Warmer doesn't start or end, it could indicate a broken thermostat. Immediately switch off and unplug the device, drain any water, and return it to the retailer.
Details the rapid warming and keeping warm functions of the baby food warmer.
Provides general advice on repairs, self-repair, and contacting customer services for questions.
Instructions for initiating the rapid heat-up function for baby food and drinks.
Steps to start the keep-warm function with specific temperature settings.
Procedure to stop the warming or keeping warm function and safely remove contents.
General| Product type | Bottle warmer |
|---|---|
| Model | JBY 52 |
| Suitable for | Bottles and jars |
| Automatic switch-off | Yes |
| Audible signal | Yes |
| Voltage | 220-240 V |
| Material | Plastic |
| Auto shut-off | Yes |
| Indicator light | Yes |
| Functions | Heating |
To Next Page
