Beurer LA 35 - After use; CLEANING AND MAINTENANCE

45
6.4 After use
1. Press the ON/OFF button
3
repeatedly until the device is switched o.
2. Disconnect the device from the socket and the mains adapter
11
.
3. Pull the cover
2
up and o.
4. Pour any remaining water down the drain as shown. Ensure that the air outlet
9
does
not come into contact with water.
7. CLEANING AND MAINTENANCE
 CAUTION
Before cleaning the device, ensure that the device is disconnected
from the power supply and that there is no water left in the water
tank
7
. Regular cleaning is a prerequisite for hygienic and fault-
free operation. The aroma diuser can be dismantled for cleaning
easily and without tools (see chapter “6.1 Initial use”).
• In the middle of the water tank
7
, the device has an
ultrasound membrane
6
. Carefully clean the ultrasound