19
•
O
nly use a mild flushing agent or vinegar/vinegar-based cleaner to perform cleaning or disinfec-
tion work.
Cleaning the ultrasound membrane with a brush, rinsing the base
NOTE
Empty the water from the base unit via the side rim.
•
Clean the ultrasound membrane with the cleaning brush provided.
Should dirty residue remain in the base unit, pour some clean, fresh water
into the base unit and empty it out via the side edge.
Clean the water evaporation pan
NOTE
•
T
he evaporation pan is hot during operation. Allow the device to cool sufficiently before cleaning it.
1) Hold the air outlet in one hand and turn it gently
backwards.
2) Hold the air outlet firmly and remove it.
3) If necessary, remove the anti-lime pad.
4) Clean the evaporation pan with the cleaning
brush.
For heavy contamination, use a
mild cleaning product, and allow it to work together
with water in the pan for 10-15 minutes. Then clean
again with the cleaning brush.
To Next Page
Loading...
