Beurer MC3800 - Initial Use

18
relax
> Press the relax button
The automatic massage programme starts.
Total duration: 15 minutes. The massage chair then remains in the position set by you.
health
> Press the health button
The automatic massage programme starts.
Total duration: 15 minutes. The massage chair then remains in the position set by you.
therapy
> Press the therapy button
The automatic massage programme starts.
Total duration: 15 minutes. The massage chair then remains in the position set by you.
Vibration massage; intensity
There are three settings for the vibration massage in the seat area.
1 (low) / 2 (medium) / 3 (high)
There are three settings for the vibration massage in the foot area.
1 (low) / 2 (medium) / 3 (high)
Note
The vibration massage functions independently of the massage programmes.
To allow this, the On/O button must be activated and the current massage programme deactivated.
Vibration massage / deactivation
You can deactivate the vibration massage by pressing the intensity button again.
Pressing the intensity button once activates the vibration massage; pressing the same button again deactivates it.
Position buttons for upright and flat position
The functions are available when a massage programme is on or o.
Back rest upwards and leg rest downwards
position button
> Press the position button.
> Press the position button again.
The back rest and leg rest stay in the current position.
Back rest downwards and leg rest upwards
position button
> Press the position button.
> Press the position button again.
The leg rest and back rest stay in the current position.
5. Initial use
Warning!
• Keep packaging material away from children!
There is a choking hazard.
• Before using the device for the rst time, read the safety notes in the Safety section.
 wSafety, pages 14 to 15