6
7. Unit description
3D Shiatsu massager
1
2
3
4
5
6
7
9
8
1. 8x 3D massage heads (4 heated and
illuminated massage heads), rotating
in pairs
2 . Control element
3.
-button
4.
-
button (anti-clockwise/clockwise
rotation of the massage heads)
5.
-button (3 intensity levels)
6. -button (heat function)
7. Handles
8 . Mains adapter
9. Mains connection cable (cable is
secured to the side)
8. Initial use
• Remove the packaging.
• Check the device, mains part plug and cable for damage.
• Insert the connector plug into the socket on the Shiatsu massager.
• Ensure that the cable does not pose a trip hazard.
9. Use
Switch on the Shiatsu massager with the
-button. The massage heads start to rotate.
You can select the massage direction by pressing the
- button.
If you want to switch on the heat function, press the
button. If you then press the button again, the
heat function switches off.
You can select from 3 intensity levels using the
-button. The device automatically starts on the lowest
intensity level.
Press the
-button to switch the Shiatsu massager off again.
Note
• The massage should feel pleasant and relaxing at all times. If the massage is painful or uncomfort-
able, stop the massage or change the contact pressure using the handle.
• Use the Shiatsu massager for max. 15 minutes. Longer massages can lead to over-stimulation of
the muscles, creating tension instead of aiding relaxation.
• The Shiatsu massager features an automatic switch-off function, which is set to the maximum
operating duration of 15 minutes.
To Next Page
