To Next PageTo Next Page
Need help?Do you have a question about the Beurer UB 83 and is the answer not in the manual?
General| Brand | Beurer |
|---|---|
| Model | UB 83 |
| Category | Accessories |
| Language | English |
Failure to observe safety information can lead to injury or material damage. Protect health and product.
Not for users insensitive to heat, very young children, or those needing supervision.
Avoid pins, folding, wet use, and ensure it's not trapped on adjustable beds.
Ask doctor about potential pacemaker interference from electric/magnetic fields.
Do not pull cords, check for wear, and avoid placing objects or heat sources on the blanket.
This heated underblanket is designed exclusively for warming beds.
Features a SAFETY SYSTEM to prevent overheating by automatic switch-off.
Spread flat on mattress, place sheet over it, connect switch, and plug into mains.
Slide switch to ON; display shows settings. Auto-dimming for sleep comfort.
Fast warming for the first 15 minutes; 'Turbo' flashes. Deactivated if switched off/on quickly.
Use buttons to set body and foot area temperatures from 0 (off) to 9 (max).
Recommend lowest setting for continuous use to avoid overheating.
Settings 9, 8, 7 automatically switch to 6 after 3 hours for safety.
Set timer for 1, 2, 3, 4, or 12 hours. Unit switches off automatically.
Slide ON/OFF slider to OFF (0) position.
Settings 1-4 are energy-efficient; 'ECO' symbol appears on display.
Press button to view current power consumption in kWh since last switch-on.
Use level 9 for body/foot and 12hr timer to create a dry, mite-hostile environment.
Disconnect power before cleaning. Use damp cloth, mild agent. No dry-cleaning, wringing.
Machine washable on gentle 30°C cycle. Limit washing to 5 times for longevity.
Shape while damp, lay flat to dry. Do not attach to lines. Ensure dry before reconnecting.
Store in original packaging, disconnect controller, avoid creasing, cool before folding.
Dispose of environmentally via local collection points, following WEEE directive.
Solutions for display not lighting up or 'E1' error.
