User Manual for DP & DPD Beverage-Air
Rev. 05/20Beverage-Air6
CLEARANCE AND PLACEMENT
Placement
Consider the following when selecting a location for your cooler:
• Clearance: 2 inches at back. None at sides.
• Floor Load: the oor on which the cooler is located must be even and level, free from vibrations, and strong enough to
support the combined weights of the unit and maximum product load.
• Ventilation: Grilel area at front must be free and clear of any object or wall.
• Power Outlet: Dedicated power outlet is located within 8 feet of length of cord.
To Next Page
Loading...
