EN
Standing fan
Dear Customer!
Thank you for purchasing our product, we hope the long term use will be satisfactory.
Product description:
The fan is the most popular means of protection against summer heat! People who are sensitive to air conditioning
prefer to use this form of cooling. It can be an ideal choice for homes and oce environments.
• 3 speed stages
• Stable, cross base
• Metal frame
Please read the following instructions carefully before use and follow them!
SAFETY WARNINGS!
General advice:
Please keep the packaging of the appliance out of the reach of children as it may lead to suocation. The appliance
may only be used by adults, the storage location must be chosen in such a way that children cannot accidentally access
it. Children should be supervised to ensure that they do not play with the appliance. The device may only be used for
its intended purpose! When using, pay attention to the physical safety and safety of those around you (especially
children). The device may only be used by people who have read, understood and are able to operate this device
in accordance with the operating instructions! People with reduced mental, physical or sensory capabilities should
not use the device! Do not use the device if you have previously dropped or struck it and it is visibly damaged! It is
strictly forbidden to use, modify or disable safety devices as intended! Unplug this product from the wall outlet before
performing any maintenance! Perform maintenance and adjustment according to the operating instructions supplied
with the device. Maintenance work must not be carried out by children!
Risk of electric shock:
Never operate the appliance with wet hands! Touching the device, including the power plug and cable, with wet hands
is strictly prohibited! The device may only be connected to AC power with the correct voltage. Do not use the appliance
near wet areas (bath, shower, pool, sink). Only connect the appliance to a mains socket that is safe to operate or has
been installed by a specialist in accordance with IEC 60364-1. The appliance is not suitable for use in damp rooms.
Before each use, make sure that the appliance and the mains plug are intact. Only use undamaged devices! Do not use
if you experience any damage to the device, contact a specialist! During use, pay attention to the integrity of the power
cord, avoid edges or objects that can damage the surface of the cord. Avoid the use of extension cords or splitters, as
they are a source of danger during operation. Always unplug the appliance when not in use. Maintenance work must
only be carried out with the mains plug removed.
Operation:
The device is equipped with a metal mesh, which is designed to protect the blades and your physical integrity. Do
not operate the appliance without the wire mesh, as it is extremely dangerous to the physical safety of those nearby!
It is strictly forbidden to reach into the device with any object! It is forbidden to turn the upper part of the device
with external force! Do not use the appliance near ammable objects and materials. Make sure that the appliance is
at least 50 cm away from all other objects. (walls, curtains, etc.) Do not cover the appliance with any material! The
manufacturer and the distributor are not liable for any damage resulting from improper use or operation.
User manual:
Please read the following user guide and safety warnings carefully before using the machine! Proceed as described
here during use! Please keep this manual for future reference. If you lend the device to someone else, please attach
this documentation. The device is designed for residential use! Do not disassemble or modify the device! In the event
of a malfunction, contact a specialist who can only repair the device with original parts! Please follow the safety
instructions!
First use:
Remove all factory packaging from the device.
Fitting the shovel and safety net:
Place the rear of the safety net around the motor drive shaft and secure it with the plastic hollander (clamping ring).
Pay attention to centralization!
Place the fan blade on the end of the shaft and place the plastic center with the manufacturer’s logo on the front
guard. Here, too, pay attention to centralization. Place the front safety net on the appliance, the blade must not touch
the safety net anywhere! Make sure that the hole in the upper edge of the safety net ts together. Make sure there are
no foreign objects left in the machine! Use the quick-release fasteners on the edge of the safety net to connect the rear
and front sections, and then screw the top of the frame together with the supplied screw and nut.
Assembling the stand part of the device:
Mount the legs in an “X” shape on the white pipe section. Secure them with the screws provided. Place the rubber base
on the ends of the legs for a stable, non-slip position, followed by the plastic covering the screws.
Finally, place the chrome stand in the white bottom and secure it at the desired height with the clamp on the tube. You
can loosen and adjust the vertical tilt of the fan with the rotor under the motor. The fan is ready for operation. Make
sure the machine is turned o before connecting it to AC power.
• 3 – high airow
• 2 – medium airow
• 1 – low airow
• 0 – turned o
To Next Page
Loading...