Beyerdynamic A 1 - Page 7

A 1 – Controls and Indicators
7
Rear view
 Input 1, stereo RCA sockets for sound sources with a high level. Connect your audio source here (CD player,
DVD player etc.)
 Input 2, stereo RCA sockets for sound sources with a high level. Connect your second audio source here,
if present.
 Output, stereo RCA sockets, looped-through input signal from input 1.
At this output you can pick up the audio signal from input 1 and route it to your stereo amplifier, active
loudspeakers or other devices with a standand input for high levels.
 Fuse holder.
The A 1 provides a microfuse as protection against wrong voltage. If it is necessary to change the fuse, only use
the same type (350 mA T). Only this ensures an optimum protection of the circuitry.
 Mains connection for 110 - 120 V AC.
 