Beyerdynamic Blue BYRD ANC - Getting Started; Product Overview; Unpacking and Storage; Charging the Battery

ABOUT THIS MANUAL
8/14 Blue BYRD ANC (2nd generation)
ABOUT THIS MANUAL
This Quick Sta Guide describes the mo impoant
functions of the Blue BYRD ANC (2nd generation) in-ear
headphones
The information in this manual refers to the default
settings of the soware version 1.0. A newer version may
be available.
► You can find information about soware updates
under „Soware update“ on page9.
SUPPLIED ACCESSORIES
• In-ear headphones Blue BYRD ANC (2nd generation)
with Bluetooth®
• Five pairs of silicone eaips (XS, S, M, L, XL).
• USB-A to USB-C cable
• Hard case for orage
• Operating inructions
PRODUCT OVERVIEW
4
1
2
5
3
3
2 4
1 On/o button
2 Remote control
[+] / [–] Increase / lower volume
( ) Multifunction button
Microphone on the back of the remote control
3 Earphones with replaceable eaips
4 USB-C connector for cable (underneath)
5 LED display (inside)
FIRST STEPS
Removing from packaging and oring
► When not in use and for transpo, ore the in-ear
headphones and accessories in the hard case
supplied.
This provides the be protection and prevents damage.
Charging the battery
We recommend you use only the supplied USB cable to
charge the battery.
1. Connect the in-ear headphones with the cable
supplied to any andard-compliant live USB-A socket
(e.g. USB power supply).
2. Remove the USB cable aer charging.
LED charging display
Flashing red: Battery 0–30 % full
Flashing yellow: Battery 30–70 % full
Flashing green: Battery 70–99 % full
Steady green: Battery 100 % full
Remarks on the life of Li-ion batteries
• When fully charged, disconnect the USB cable from the
charger and in-ear headphones.
• CAUTION! High temperatures, especially with a high
charge level, can cause irreversible damage.
• If the battery is not used or is ored for extended
periods of time, it is recommended to charge it to
approx. 50% and ore it at no more than 20°C.
• Switch o the battery-powered product aer use.
Selecting/changing eaips
The in-ear headphones come with five dierent sizes
of eaips. It is impoant to choose the right eaips for
your ears to achieve a comfoable and secure fit, good
ambient noise attenuation and the be possible sound.
If you are using them regularly, we recommend changing
the eaips every three months. Replacement eaips
made of silicone and other materials can be ordered
from the beyerdynamic spare pas shop:
www.beyerdynamic.com/service/spare-pas